Helium Mapper Kit

Note:

• If a non-rechargable battery is used with WisBlock Base Board it has to be unplugged before connecting the USB cable to the port on the board in order to configure the device. Not doing so might damage the battery and cause damage to the battery and board.
• If a battery is used with WisBlock Base Board, please check that the battery connector has the correct polarity. You can check the required polarity in our Documentation Center.

Product Description

Build your own Helium Mapper Node with the WisBlock based solution. Support the community-driven Helium Mapper project.
Helium Mappers is a community-driven project looking to provide information about the effective coverage for nodes (LoRaWAN end devices) within the Helium Network. The coverage map is available at mappers.helium.com.
The Helium Mapper Kit includes everything to build a Helium Mapper in a short time. The WisBlock Core modules are already flashed with the Helium Mapper Firmware. All you have to do is to set up the connection to your Helium Console. Follow the guide on Make a Helium Mapper With The WisBlock article to set up your Helium Mapper in a very short time.
Important information: The kits do not include a battery

Kit 1 contains the Unify Enclosure 100x75x38 with a solar panel, so that your Helium Mapper does not run out of battery while you help the community to build up the World Map of Helium Hotspots Coverage.

Kit 2 contains the Unify Enclosure 100x75x38 without the solar panel.

This product includes a mounting plate with a highly optimized integrated antenna for BLE and LoRaWAN. Please follow our mounting guide for the correct connection of the antennas to the WisBlock Core module.

Package Inclusion 

• Kit option #1 (Solar Panel Helium Mapper Kit):
• RAK19007
• RAK4631
• RAK1904
• RAK12500
• Unify Enclosure 100x75x38 with solar panel
• Mounting Accessories (order separate)
• Unify Pole Mounting Vertical Kit (Type A)
• Unify Wall Mounting Kit (Type D)
• Unify Belt Clip Kit (Type E)
• Unify DIN Rail Mounting Kit (Type F)
• Unify Magnet Mounting Kit (Type G)
• Unify Belt Loop Kit (Type H)
• Unify Label Kit (Type I)
• Unify Hook Loop Kit (Type J)
• LoRa antenna
• BLE antenna
• GPS antenna
• Kit option #2 (Helium Mapper Kit):
• RAK19007
• RAK4631
• RAK1904
• RAK12500
• Unify Enclosure 100x75x38 without solar panel
• Mounting Accessories (order separate)
• Unify Pole Mounting Vertical Kit (Type A)
• Unify Wall Mounting Kit (Type D)
• Unify Belt Clip Kit (Type E)
• Unify DIN Rail Mounting Kit (Type F)
• Unify Magnet Mounting Kit (Type G)
• Unify Belt Loop Kit (Type H)
• Unify Label Kit (Type I)
• Unify Hook Loop Kit (Type J)
• LoRa antenna
• BLE antenna
• GPS antenna

Tutorial and Quickstart Guides

• Make a Helium Mapper with the WisBlock 
• RAKstars Helium Mapper Wiki 
• Assembly Instructions for Helium Mapper Kit 1
• Assembly Instructions for Helium Mapper Kit 2