RAK2245 96Boards Edition
Concentrator for LoRaWAN
Gateway Module for LoRaWAN
RAK2245 96Boards has the same compact form factor and great performance as the other RAK2245 modules. It is fully compatible with modules supporting the 96Boards standard, such as Nitrogen and Orange Pi. Thus it is an easy way to integrate LoRaWAN® into an already existing solution utilizing a 96Boards compatible IoT module.
As with the other modules in the RAK2245 line, it is based on the Semtech® 1301 and dual SX1257/58 front-end chips. It is a full-fledged 8 channel LoRa® concentrator with a number of improvements over the last generation (RAK831).
Complete documentation of this product can be found on our website documentation page.
- SX1301 + 2x SX1257/58 provide 8 uplink and 1 downlink LoRa® demodulation paths
- Max Tx Power of 27dBm
- RX sensitivity of -139dBm
- Improved noise resistance due to improved RF chain filtering (Additional SAW)
- Full LoRaWAN® 1.0.2 stack support
- Supported bands: (EU433, CN470, IN865, EU868, AU915, US915, KR620, AS920 and AS923)
- Integrated Ublox MAX-7Q GPs Module
- 40 pin header hole mount (2mm pitch, compatible with 96Boards)
- Smallest LPWAN concentrator at the time of its release - 60mm(L) x 30mm(W) x 14.9mm(H)
- Redesigned heat sink for better thermal dissipation and reduced thermal noise
- Board Dimensions: 30mm x 60mm x 19.8mm (including the heat sink)
- Board Weight: Approximately 0.85 oz
- Package Inclusions: RAK2245 96Boards, SubG Antenna, and GPS Antenna
Questions and Answers
You named the Orange Pi board as an example of the 96er standard. Did you ever try the Orange pi (i96) with your RAK2245? Actually there is no Orange pi image (from Orange pi itself) available with active spi interconnect device (f.e. /dev/spi..). Even WiringPi with the SPI module isn't working. Therefore the well knows examples for Semtech-packet forwarder or ttn multiprotocol forwarder aren't working. Do I have to develop my own application and make the SPI communication via bit-banging?
Yes, we have not firmware for this particular case. There might be someone that has worked in a similar scenarios in the forums.
Perhaps you can post here: forum.rakwireless.com