WisMesh Board ONE

WisMesh Board One: Your Compact, Flexible Meshtastic Node

The WisMesh Board ONE is a new BaseBoard tailored for Meshtastic Board. It offers Meshtastic compatibility on a smaller footprint while still offering a user button, a 1.3” OLED display, all GPIO’s, I2C, SPI available on pin headers and a WisBlock Sensor Slot, which you can use for an optional GNSS module RAK12500 or other WisBlock Sensor Modules (compatible sensors can be added during checkout for your convenience).

The WisMesh Board ONE equipped with the Nordic nRF52 ultra-low-power MCU, built with an onboard BLE antenna and an iPEX connector for the LoRa antenna. While it comes with an FPC base antenna, the iPEX connector leaves the freedom to connect any LoRa antenna with an optional iPEX to SMA or iPEX to RP-SMA antenna cable.

The battery and solar connectors are placed on the side, allowing for slimmer enclosures by eliminating the need for extra height to accommodate cables and connectors.

Optionally, you can buy the Board ONE with a 3D-printed enclosure. We have also published the 3D model and mechanical dimensions to make it easy for you to design your own enclosure. It is ideal for applications such as Meshtastic GPS and Meshtastic Tracker.

With the Meshtastic Getting Started Guide, the WisMesh Board ONE is ready for use within a short time.

Product Features

• RAK4630 WisDuo module, pre-flashed with the Meshtastic firmware
  • Nordic nRF52840:
    • Ultra-low-power MCU
    • 32-bit ARM® Cortex-M4F CPU
    • 64MHz CPU clock
    • 1 MB Flash, 256 KB RAM
  • Semtech SX1262:
    • Low power high range
    • LoRa® transceiver
• 1 WisBlock Sensor Slot
• User button
• Connector for OLED display
• GPIO exposure on pin header
• 1.3” OLED display (pre-mounted or optional connected through a pin header)
• BLE antenna onboard
• LoRa antenna included
• USB Type C connector
• Battery connector for rechargeable Li-Ion battery
• Connector for 5V supply from solar panel or external power supply
• PCB size 60.8x22.9x9.85mm (lx w x h) Width with OLED display is 36mm

Product Inclusion

• 1 pc WisMesh Board ONE
• 1 pc OLED display
• 1 pc LoRa antenna
• 1 pc USB cable

Why WisMesh B1?

Learn the story behind its creation. Discover how this Mesh Node came to life.

FAQ

Is WisMesh B1 a good alternative to Heltec T114 or Meshtastic T114?

WisMesh B1 is the best alternative to Heltec T114 or Meshtastic T114. Here's why:

• Is easy to integrate and securely attach to enclosures and add modules without messy wiring
• Has sturdiers, bigger, and easier to read than older TFT screens
• Has a dedicated slot for GPS antenna that improves reception
• Has a dedicated slot for an external antenna that enhances communication over longer distances
• Comes with a pre-made 3D-printed enclosures for convenience
• …and more

Documentation 

• WisMesh Board ONE Quick Start Guide
• WisMesh Board ONE Datasheet
• WisMesh Board ONE 3D file
• WisMesh Board ONE With Enclosure 3D file

Tutorials

• Meshtastic Basic Device Setup
• Meshtastic Gateway Setup