WisMesh Ethernet Gateway
The MQTT Gateway for Meshtastic
Prefer another courier for your delivery? Contact us for special shipping arrangements.
The WisMesh MQTT Ethernet Gateway is the solution to connect your Meshtastic devices with the Cloud. It provides an interface from your Meshtastic nodes to either the Meshtastic MQTT Broker or to your own MQTT Broker. Whether you want to send sensor data, location information, or even text messages to the Cloud, this device is the one you need.
The WisMesh MQTT Ethernet Gateway uses our WisBlock RAK4631 Core module, which is pre-flashed with Meshtastic firmware. Besides the LoRa connectivity, it uses our RAK13800 Ethernet module to connect to the internet and is placed on our RAK19007 Base Board.
The RAK19018 PoE module is an optional accessory that allows the gateway to be powered through the Ethernet cable.
Select your preferred configuration:
- Ethernet Only for basic connectivity.
- Ethernet + PoE for a streamlined setup with Power over Ethernet support.
Both bundles are pre-assembled and ready to deploy for immediate use. It comes assembled in our Unify Enclosure 150mmx100mmx45mm with an external LoRa antenna and waterproof Ethernet connector.
The WisMesh MQTT Ethernet Gateway comes pre-assembled and pre-flashed with the original Meshtastic firmware-RAK4631_eth_gw, which supports JSON over MQTT.
Everything required to start is to set up the WisMesh MQTT Ethernet Gateway with the Meshtastic app for mobile through BLE.
Key Features
-
WisBlock RAK4631 Core Module
- Nordic nRF52850 WisBlock Core module, pre-flashed with the Meshtastic firmware
- Bluetooth Low Energy 5.0 protocol stack
- Nordic nRF52840:
- Ultra-low-power MCU
- 32-bit ARM® Cortex-M4F CPU
- 64MHz CPU clock
- 1 MB Flash, 256 KB RAM
- Semtech SX1262:
- Low power high range
- LoRa® transceiver
-
WisBlock RAK19007 Base Board
- 30x60mm with four Sensor Slots and one IO slots
- USB Type C debug port
- 1 slot for WisBlock Core MCU 4 slots for modules with 24pin WisBlock Sensor Modules
-
WisBlock RAK13800 Ethernet Module
- Based on WIZnet W5100S-L chip
- Support four independent SOCKETs simultaneously
- Support SOCKET-less command
-
WisBlock RAK19018 PoE module (optional)
- Based on Silvertel Ag9905MT
- IEEE802.3af compliant
- Input voltage range: 36V to 57V
-
WisMesh Blade Antenna
- Black high-performance LoRa antenna
- High efficiency
- Omnidirectional
- Vertically polarized
-
9xx MHz variant
- Frequency Range: 902~928 MHz
- VSWR: ≤ 1.5
-
8xx MHz variant
- Frequency Range: 863~870 MHz
- VSWR: ≤ 1.3
Package Inclusions
-
With Unify Enclosure 150x100x45mm
- 1 pc WisMesh Ethernet Gateway
- 1 pc WisMesh Blade Antenna
- 1 pc USB Cable
-
Without Enclosure
- 1 pc WisBlock RAK19007 Base Board
- 1 pc WisBlock RAK4631 Core Module
- 1 pc WisBlock RAK13800 Ethernet Module
- 1 pc WisBlock RAK19018 PoE Module (Option)
- 1 pc PCB Antenna for LoRa
- 1 pc BLE Antenna
- 1 pc USB Cable
- 1 set Screw
Documentation
FAQs
How to Select the Right Bundle for Your Meshtastic PoE Build?
|
Use Case |
Recommended Bundle |
Included Modules |
Key Features |
|
Send sensor data, location information, or even text messages to the Cloud |
Ethernet Only |
RAK13800 |
Stable internet connectivity via Ethernet. Requires an external power source. |
|
Meshtastic PoE Build |
Ethernet + PoE |
RAK13800 + RAK19018 |
Includes Power over Ethernet (PoE) for simplified installation and power supply through Ethernet. |
Tutorials
Questions and Answers
Have a Question?
Be the first to ask a question about this.
Product Reviews
FAQs
How to Select the Right Bundle for Your Meshtastic PoE Build?
|
Use Case |
Recommended Bundle |
Included Modules |
Key Features |
|
Send sensor data, location information, or even text messages to the Cloud |
Ethernet Only |
RAK13800 |
Stable internet connectivity via Ethernet. Requires an external power source. |
|
Meshtastic PoE Build |
Ethernet + PoE |
RAK13800 + RAK19018 |
Includes Power over Ethernet (PoE) for simplified installation and power supply through Ethernet. |
Tutorials
