We care about your safety and your health. Learn more how RAK helps fight against this pandemic. We are on this together.
Cart 0
WisTrio LPWAN Tracker | RAK5205
WisTrio LPWAN Tracker | RAK5205
WisTrio LPWAN Tracker | RAK5205
WisTrio LPWAN Tracker | RAK5205

WisTrio LPWAN Tracker


Regular price $49.50 $0.00
The shipping fee is calculated at checkout.
Prefer another courier for your delivery? Contact us for special shipping arrangements.

Product Description

WisTrio LPWAN Tracker (RAK5205) is built upon the RAK811. At its core is an STM32L1 microcontroller driving Semtech® SX1276/78 LoRa® chip.

GPS is present as well as a number of sensors. The aforementioned makes the board suitable for rapid application development, such as asset tracking, vehicle management, location-based services, environmental monitoring, etc. Additionally, because of its low power consumption in sleep mode, it can provide a long-lasting solution for any battery-powered project.

The support for AT commands makes configuration a breeze. For advanced users is open source support in case a custom firmware is required.

Complete documentation of this product can be found on our website documentation page. 

Key Features

  • RAK811 (Semtech® 1276/78 + STM32L1) at its core
  • Ublox Max 7Q GPS Module Built-in
  • Bosch BME680 Sensor (Temperature, Humidity, Air Pressure, Gas)
  • LIS3DH 3-axis Accelerometer
  • Works in Battery/Solar Power Mode
  • Sleep Mode consumption down to 14.6uA
  • Custom AT command Firmware
  • Full LoRaWAN® 1.0.2 Stack Support
  • Interfaces Include I2C, UART, and ADC
  • 96Boards compatible form factor (30pin header)


  • Board Dimension: 60mm x 30mm x 11.45mm
  • Board Weight: Approximately 5.64 oz
  • Package Inclusions:
    • WisTrio LPWAN Tracker
    • GPS antenna
    • LoRa® antenna
    • Jumpers
    • DuPont Lines
    • Micro USB Cable

Questions and Answers

  • Hi, what sort of antenna does the IPEX variant come with?

    You can check the link below:

    This is for a gateway kit, however, the antennas should be the same as the ones shown in the first image.

  • Hello, The GPS for this device is giving a location which is 500 meters away from the real location. I tried in open field and lat/long reading is off by 500 meters Is there anyway to adjust this?

    For questions of this nature please ask in the forum.

  • Hello, I have 4 units of this working at 433MHz. I have issues with the GPS . After boot, GPS works fine but after that it reports GPS Signal not found. All 4 devices are acting on the same way [16:27:28:480] OTAA mode: [16:27:28:480] DevEui: 60C5A8FFFE760016 [16:27:28:480] AppEui: 00137A1000000000 [16:27:28:480] AppKey: 5A6967426565416C6C69616E63653039 [16:27:28:482] OTAA Join Start... [16:27:30:282] latitude: 14.489575, longitude: 121.006007 , altitude: 0 ; [16:27:33:664] OTAA Join Success! [16:27:33:673] latitude: 14.487805, longitude: 121.009286 , altitudeGps: 34m [16:27:37:516] Tx_Bat: 4166mv,speed: 0.370400km/h [16:27:41:359] Tx_ACC X:16mg Y:-16mg Z:-976mg [16:27:45:491] T: 33.55 degC, P: 1005.56 hPa, H 63.36 %rH , G: 18128 ohms [16:27:49:790] T: 33.70 degC, P: 1005.56 hPa, H 62.96 %rH , G: 22833 ohms [16:30:02:491] FAIL. GPS signal not found! [16:30:07:788] Tx_Bat: 4170mv,speed: 0.000000km/h [16:30:11:631] Tx_ACC X:16mg Y:-16mg Z:-976mg [16:30:15:763] T: 33.68 degC, P: 1005.56 hPa, H 64.55 %rH , G: 19297 ohms [16:30:20:063] T: 33.69 degC, P: 1005.58 hPa, H 64.05 %rH , G: 24413 ohms [16:32:32:763] FAIL. GPS signal not found! [16:32:36:979] Tx_Bat: 4166mv,speed: 0.000000km/h [16:32:40:822] Tx_ACC X:16mg Y:-16mg Z:-976mg [16:32:44:955] T: 33.65 degC, P: 1005.62 hPa, H 64.58 %rH , G: 20608 ohms [16:32:49:254] T: 33.65 degC, P: 1005.60 hPa, H 64.10 %rH , G: 26214 ohms

    What firmware version are you running?

Product Reviews