Unify Enclosure Solar IP65 100x75x38mm

The Unify Enclosures are modular IP65 rated outdoor enclosures that include tailored features to support WisBlock Base Boards and WisBlock Modules, but are highly adaptable to any application with spacious internals and thoughtfully designed universal mounting options.

The variant has an 80 x 45 mm solar panel integrated in the lid and a matching cable for the Solar Panel Connector of the WisBlock Base Boards. Depending on the power consumption of your application, it can recharge a battery and make the product independent of an IP65-rated  external power source.

Deployment of your IoT solution is easy thanks to a range of swappable mounting accessories that enable you to install your IoT solution in any setting. These accessories are hosted on the rear surface of the enclosure using the integrated mounting locations and are secured with M3 fasteners into robust and reusable brass threaded inserts.

The 100x75x38mm enclosure has enough internal space to support the following WisBlock Base Boards - RAK19003 and RAK19007.

There is also space for a flat profile LiPo battery to be hosted under an internal mounting plate. The space available below a mounting plate in standard configuration is approximately 55x34x6mm excluding narrow sections where there are enclosure features.

Accessories Supported: 

• Unify WisBlock Mounting Plate 100x75x38mm - Allows you to create your own custom internal mounting solution easily with WisBlock hardware
• Unify WisBlock Mounting Plate 100x75x38mm with integrated LoRa antenna, 863 - 870 MHz for RU864, IN865 and EU868
• Unify WisBlock Mounting Plate 100x75x38mm with integrated LoRa antenna, 902 - 928 MHz for AU915, US915, KR920 and AS923
• Unify Mounting Plate Blank 100x75x38mm - Allows you to create your own custom internal mounting solution for any hardware
• Unify Pole Mounting Vertical Kit (Type A)
• Unify Wall Mounting Kit (Type D)
• Unify Belt Clip Kit (Type E)
• Unify DIN Rail Mounting Kit (Type F)
• Unify Magnet Mounting Kit (Type G)
• Unify Belt Loop Kit (Type H)
• Unify Label Kit (Type I)
• Unify Hook Loop Kit (Type J)

Accessories NOT Supported (only compatible with larger Unify Enclosures)

• Unify Pole Mounting Horizontal Kit (Type B)
  • Compatible enclosure for this accessory - 180x130x60mm
• Unify Pole Mounting Horizontal Kit (Type C)
  • Compatible enclosure for this accessory - 150x100x45mm
  • Compatible enclosure for this accessory - 180x130x60mm

Specifications

Enclosure Specifications

• Material: ABS UL94V-0
• External Size: 100x75x38mm (including lid)
• Internal Space: Approx. 86x61x29mm (usable space may vary due to internal features)
• General Wall Thickness: 4.5mm
• Waterproofing: Silicone waterproof seal with a square profile to prevent twisting during installation
• Threading: Brass threaded inserts throughout (blind type)

Solar Panel Specifications

• Open Circuit Voltage: 6.1V (±10%)
• Short Circuit Current: 95mA (±5%)
• Voltage at Nominal Power: 5V (±10%)
• Current at Nominal Power: 90mA (±5%)
• Cell Efficiency: 18%
• Size: 80 x 45 x 1.7 mm (±0.2 mm)
• Temperature Range: -20 to 65°C
• Humidity Range: 45-85%

Mounting Plate Specifications

1. Unify WisBlock Mounting Plate with Screw Bosses for 100x75x38mm Enclosure (Bespoke Plate):

• Compatibility: Fits perfectly into the Unify Enclosure 100x75x38mm
• Supports: RAK19003, RAK19007
• Thickness: 2mm 
• Customization: The mounting plate can be easily adapted to accommodate various Base Boards and attached sensors by removing unnecessary sections with simple hand-operated side-cutters.
• Included Hardware:
  • M3 countersink screws for enclosure mounting
  • Self-tapping screws for mounting the WisBlock Base Board to the plate

2. Unify Mounting Plate Blank for 100x75x38mm Enclosure (Blank Plate):

• Compatibility: Unify Enclosure IP65 100x75x38mm
• Thickness: 2mm
• Purpose: Allows for custom mounting solutions within the enclosure.
• Included Hardware: M3 countersink screws for enclosure mounting

3. Unify Enclosure Internal Mounting Plate with Integrated Antenna and Screw Bosses for WisBlock - 100x75x38mm Enclosure:

• Antenna Integration: Optimized antennas for LoRa®/LoRaWAN® and BLE, improving communication range and reducing internal cabling requirements.
• Frequency Ranges:
  • 868 to 870 MHz: RU864, IN865, EU868
  • 902 to 928 MHz: US915, AU915, KR920, AS923
• Battery Space: Approximately 55x34x6mm of space is available for a flat-profile LiPo battery underneath the mounting plate, excluding narrow sections where enclosure features are present.
• Included Hardware: M3 countersink screws for enclosure mounting
• Thickness: 1.2mm

Documentation

• Unify Enclosure Solar IP65 100x75x38mm
• Installation Guide
• Datasheet
• WisBlock Plate with antenna
• Solar panel 80 x 45 mm

• Unify Enclosure Solar IP65 100x75x38mm
• Installation Guide
• Datasheet
• WisBlock Plate with antenna
• Solar panel 80 x 45 mm