Unify Enclosure IP67 150x100x45mm

The Unify Enclosures are modular IP67 rated outdoor enclosures that include tailored features to support WisBlock Base Boards and WisBlock Modules, but are highly adaptable to any application with spacious internals and thoughtfully designed universal mounting options.

Deployment of your IoT solution is easy thanks to a range of swappable mounting accessories that enable you to install your IoT solution in any setting. These accessories are hosted on the rear surface of the enclosure using the integrated mounting locations and are secured with M3 fasteners into robust and reusable brass threaded inserts.

The 150x100x45mm enclosure has enough internal space to support the following WisBlock Base Boards - RAK19001, RAK19003, and RAK19007.

There is also space for a flat profile LiPo battery to be hosted under an internal mounting plate. The space available below a mounting plate in standard configuration is approximately 107x57x6mm excluding narrow sections where there are enclosure features.

Unify Enclosure Range

• Unify Enclosure IP67 150x100x45mm (This enclosure)
• Unify Enclosure IP67 100x75x38mm
• Unify Enclosure Solar IP65 100x75x38mm (with solar)
• Unify Enclosure IP67 150x100x45mm (with Pre-Mounted M8 5-pin Connectors and RP-SMA Antenna)
• Unify Enclosure IP67 180x130x60mm

Accessories Supported:

• Unify WisBlock Mounting Plate 150x100x45mm - Allows you to create your own custom internal mounting solution easily with WisBlock hardware
• Unify Mounting Plate Blank 150x100x45mm - Allows you to create your own custom internal mounting solution for any hardware
• Unify Pole Mounting Vertical Kit (Type A)
• Unify Pole Mounting Horizontal Kit (Type C)
• Unify Wall Mounting Kit (Type D)
• Unify Belt Clip Kit (Type E)
• Unify DIN Rail Mounting Kit (Type F)
• Unify Magnet Mounting Kit (Type G)
• Unify Belt Loop Kit (Type H)
• Unify Label Kit (Type I)
• Unify Hook Loop Kit (Type J)
  

Accessories NOT Supported (only compatible with larger Unify Enclosures)

• Unify Pole Mounting Horizontal Kit (Type B)
  • Compatible enclosure for this accessory - 180x130x60mm

Enclosure Specifications:

• Material: ABS UL94V-0
• External Size: 150x100x50mm (including lid)
• Internal Space: Approx. 138x88x35mm at the widest region (usable space may vary due to internal features; narrowest point of internal width: 60mm)
• General Wall Thickness: 4.5mm
• Waterproofing: Silicone waterproof seal with a square profile to prevent twisting during installation
• Threading: Brass threaded inserts throughout (blind type)

Mounting Plate Specifications:

1. Unify WisBlock Mounting Plate with Screw Bosses for 150x100x45mm Enclosure (Bespoke Plate)

• Compatibility: Fits perfectly into the Unify Enclosure 150x100x45mm
• Supports:
  • RAK19001
  • RAK19003 (simultaneously with 1 x RAK19001)
  • RAK19007 (simultaneously with 1 x RAK19001)
• Thickness: 2mm
• Customization: The mounting plate can be easily adapted to accommodate various Base Boards and attached sensors by removing unnecessary sections using simple hand-operated side-cutters.
• Included Hardware:
  • M3 countersink screws for enclosure mounting
  • Self-tapping screws for mounting the WisBlock Base Board to the plate

2. Unify Mounting Plate Blank for 150x100x45mm Enclosure (Blank Plate)

• Compatibility: Fits perfectly into the Unify Enclosure IP67 150x100x45mm
• Thickness: 2mm
• Purpose: Allows for custom mounting solutions within the enclosure
• Included Hardware: M3 countersink screws for enclosure mounting

Package Inclusion

• 1 pc Unify Enclosure 150x100x45mm
• 1 pc Mounting Plate (As per option selected)
• 1 Screw set

Documentation

• Datasheet
• Installation Guide
• RAKBox-UO150x100x45 - 3D and 2D Model Downloads

• Datasheet
• Installation Guide
• RAKBox-UO150x100x45 - 3D and 2D Model Downloads