Unify Enclosure IP67 100x75x38mm

The Unify Enclosures are modular IP67 rated outdoor enclosures that include tailored features to support WisBlock Base Boards and WisBlock Modules, but are highly adaptable to any application with spacious internals and thoughtfully designed universal mounting options.

Deployment of your IoT solution is easy thanks to a range of swappable mounting accessories that enable you to install your IoT solution in any setting. These accessories are hosted on the rear surface of the enclosure using the integrated mounting locations and are secured with M3 fasteners into robust and reusable brass threaded inserts.

The 100x75x38mm enclosure has enough internal space to support the following WisBlock Base Boards - RAK19003, and RAK19007.

There is also space for a flat profile LiPo battery to be hosted under an internal mounting plate. The space available below a mounting plate in standard configuration is approximately 55x34x6mm excluding narrow sections where there are enclosure features.

Unify Enclosure Range

• Unify Enclosure IP67 100x75x38mm (This enclosure)
  
• Unify Enclosure Solar IP65 100x75x38mm (with solar)
• Unify Enclosure IP67 150x100x45mm
• Unify Enclosure IP67 150x100x45mm (with Pre-Mounted M8 5-pin Connectors and RP-SMA Antenna)
• Unify Enclosure IP67 180x130x60mm

Accessories Supported:

• Unify WisBlock Mounting Plate 100x75x38mm - Allows you to create your own custom internal mounting solution easily with WisBlock hardware
• Unify WisBlock Mounting Plate 100x75x38mm with integrated LoRa antenna, 863 - 870 MHz for RU864, IN865, and EU868
• Unify WisBlock Mounting Plate 100x75x38mm with integrated LoRa antenna, 902 - 928 MHz for AU915, US915, KR920, and AS923
• Unify Mounting Plate Blank 100x75x38mm - Allows you to create your own custom internal mounting solution for any hardware
• Unify Pole Mounting Vertical Kit (Type A)
• Unify Wall Mounting Kit (Type D)
• Unify Belt Clip Kit (Type E)
• Unify DIN Rail Mounting Kit (Type F)
• Unify Magnet Mounting Kit (Type G)
• Unify Belt Loop Kit (Type H)
• Unify Label Kit (Type I)
• Unify Hook Loop Kit (Type J)

Accessories NOT Supported (only compatible with larger Unify Enclosures)

• Unify Pole Mounting Horizontal Kit (Type B)
  
  • Compatible enclosure for this accessory - 180x130x60mm
• Unify Pole Mounting Horizontal Kit (Type C)
  • Compatible enclosure for this accessory - 150x100x45mm
  • Compatible enclosure for this accessory - 180x130x60mm

Enclosure Specifications:

• Material: ABS UL94V-0
• External Size: 100x75x38mm (including lid)
• Internal Space: Approx. 86x61x29mm (Usable space varies due to internal features)
• General Wall Thickness: 4.5mm
• Waterproofing: Silicone waterproof seal (square profile to prevent twisting upon install)
• Threading: Brass threaded inserts throughout (blind type)

Mounting Plate Specifications:

1. Unify WisBlock Mounting Plate with Screw Bosses for 100x75x38mm Enclosure (Bespoke Plate)

• Compatibility: Fits perfectly into the Unify Enclosure 100x75x38mm
• Supports: RAK19003, RAK19007
• Thickness: 2mm
• Customization: The mounting plate can be easily adapted to accommodate various Base Boards and attached sensors by removing unnecessary sections with simple hand-operated side-cutters.
• Included Hardware:
  • M3 countersink screws for enclosure mounting
  • Self-tapping screws for mounting the WisBlock Base Board to the plate

2. Unify Mounting Plate Blank for 100x75x38mm Enclosure (Blank Plate)

• Compatibility: Unify Enclosure IP67 100x75x38mm
• Thickness: 2mm
• Purpose: Allows for custom mounting solutions within the enclosure.
• Included Hardware: M3 countersink screws for enclosure mounting

3. Unify Enclosure Internal Mounting Plate with Integrated Antenna and Screw Bosses for WisBlock - 100x75x38mm Enclosure

• Antenna Integration: Optimized antennas for LoRa®/LoRaWAN® and BLE, improving communication range and reducing internal cabling requirements.
• Frequency Ranges:
  • 868 to 870 MHz: RU864, IN865, EU868
  • 902 to 928 MHz: US915, AU915, KR920, AS923
• Battery Space: Approximately 55x34x6mm of space is available for a flat-profile LiPo battery underneath the mounting plate, excluding narrow sections where enclosure features are present.
• Included Hardware: M3 countersink screws for enclosure mounting
• Thickness: 1.2mm

Package Inclusion

• 1 pc Unify Enclosure 100x75x38mm
• 1 pc Mounting Plate (As per option selected)
• 1 Screw set

Documentation

• Datasheet
• Installation Guide
• RAKBox-UO100x75x38 - 3D and 2D CAD Data Downloads