Unify Enclosure IP67 100x75x38mm
Prefer another courier for your delivery? Contact us for special shipping arrangements.
The Unify Enclosures are modular IP67 rated outdoor enclosures that include tailored features to support WisBlock Base Boards and WisBlock Modules, but are highly adaptable to any application with spacious internals and thoughtfully designed universal mounting options.
Deployment of your IoT solution is easy thanks to a range of swappable mounting accessories that enable you to install your IoT solution in any setting. These accessories are hosted on the rear surface of the enclosure using the integrated mounting locations and are secured with M3 fasteners into robust and reusable brass threaded inserts.
The 100x75x38mm enclosure has enough internal space to support the following WisBlock Base Boards - RAK19003 and RAK19007.
There is also space for a flat profile LiPo battery to be hosted under an internal mounting plate. The space available below a mounting plate in standard configuration is approximately 55x34x6mm excluding narrow sections where there are enclosure features.
Accessories supported:
- Unify WisBlock Mounting Plate 150x100x45mm - Allows you to create your own custom internal mounting solution easily with WisBlock hardware
- Unify Mounting Plate Blank 150x100x45mm - Allows you to create your own custom internal mounting solution for any hardware
- Unify Pole Mounting Vertical Kit (Type A)
- Unify Pole Mounting Horizontal Kit (Type C)
- Unify Wall Mounting Kit (Type D)
- Unify Belt Clip Kit (Type E)
- Unify DIN Rail Mounting Kit (Type F)
- Unify Magnet Mounting Kit (Type G)
- Unify Belt Loop Kit (Type H)
- Unify Label Kit (Type I)
- Unify Hook Loop Kit (Type J)
Accessories NOT Supported (only compatible with larger Unify Enclosures)
-
Unify Pole Mounting Horizontal Kit (Type B)
- Compatible enclosure for this accessory - 180x130x60mm
Specifications
Enclosure Specifications
- Material: ABS UL94V-0 (flame-retardant)
- External Dimensions: 150 x 100 x 50 mm (including lid)
- Internal Space: Approximately 138 x 88 x 35 mm at the widest point (Usable space may vary due to internal features; narrowest internal width: 60 mm)
- Wall Thickness: 4.5 mm
- Seal: Silicone waterproof seal with a square profile to prevent twisting during installation
- Threaded Inserts: Brass, blind type throughout
Unify WisBlock Mounting Plate with Screw Bosses for 150 x 100 x 45 mm Enclosure
This bespoke mounting plate fits perfectly into the Unify Enclosure (150 x 100 x 45 mm) and includes integrated screw bosses to support the following components:
The mounting plate can be easily adapted to accommodate the Base Boards and any attached sensors by removing unneeded sections using simple hand-operated side-cutters.
Specifications:
- Compatibility: Unify Enclosure IP67 (150 x 100 x 45 mm)
- Material Thickness: 2 mm
-
Mounting Hardware:
- Includes M3 countersink screws for enclosure attachment
- Includes self-tapping screws for securing the WisBlock Base Board to the mounting plate
Unify Mounting Plate Blank for 150 x 100 x 45 mm Enclosure
This blank mounting plate is designed to fit seamlessly into the Unify Enclosure (150 x 100 x 45 mm), allowing you to create a custom mounting solution tailored to your specific needs.
Specifications:
- Compatibility: Unify Enclosure IP67 (150 x 100 x 45 mm)
- Material Thickness: 2 mm
- Mounting Hardware: Includes M3 countersink screws for enclosure attachment
Documentation
Questions and Answers
Have a Question?
Be the first to ask a question about this.
Product Reviews
- Material: ABS UL94V-0 (flame-retardant)
- External Dimensions: 150 x 100 x 50 mm (including lid)
- Internal Space: Approximately 138 x 88 x 35 mm at the widest point (Usable space may vary due to internal features; narrowest internal width: 60 mm)
- Wall Thickness: 4.5 mm
- Seal: Silicone waterproof seal with a square profile to prevent twisting during installation
- Threaded Inserts: Brass, blind type throughout
Unify WisBlock Mounting Plate with Screw Bosses for 150 x 100 x 45 mm Enclosure
This bespoke mounting plate fits perfectly into the Unify Enclosure (150 x 100 x 45 mm) and includes integrated screw bosses to support the following components:
The mounting plate can be easily adapted to accommodate the Base Boards and any attached sensors by removing unneeded sections using simple hand-operated side-cutters.
Specifications:
- Compatibility: Unify Enclosure IP67 (150 x 100 x 45 mm)
- Material Thickness: 2 mm
-
Mounting Hardware:
- Includes M3 countersink screws for enclosure attachment
- Includes self-tapping screws for securing the WisBlock Base Board to the mounting plate
Unify Mounting Plate Blank for 150 x 100 x 45 mm Enclosure
This blank mounting plate is designed to fit seamlessly into the Unify Enclosure (150 x 100 x 45 mm), allowing you to create a custom mounting solution tailored to your specific needs.
Specifications:
- Compatibility: Unify Enclosure IP67 (150 x 100 x 45 mm)
- Material Thickness: 2 mm
- Mounting Hardware: Includes M3 countersink screws for enclosure attachment
